Miele WCE 660 Operating Instructions Manual Download Page 8

Page: 8 / 100

Warning and Safety instructions

Safety with children



Children under 8 years of age must be kept away from the

washing machine unless they are constantly supervised.



Children 8 years and older may only use the washing machine

unsupervised if they have been shown how to use it safely and
recognise and understand the consequences of incorrect operation.



Children must not be allowed to clean or maintain the washing

machine unsupervised.



Please supervise children in the vicinity of the washing machine

and do not let them play with it.

Technical safety



Please observe the instructions in “Installation and connection”

and “Technical data”.



Before setting up the washing machine, check it for any externally

visible damage. Do not install or use a damaged machine.



Before connecting the washing machine, ensure that the

connection data on the data plate (fuse rating, voltage and
frequency) match the mains electricity supply. If in any doubt,
consult a qualified electrician.



Reliable and safe operation of this washing machine can only be

assured if it has been connected to the mains electricity supply.

Summary of Contents for WCE 660





































































































Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands

Miele WCE 660, Operating Instructions Manual

Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands