Miele WCE 660 Operating Instructions Manual Download Page 70

Page: 70 / 100

Problem solving guide



Clean the drain filter thoroughly.



Remove any foreign objects (e.g.,
buttons, coins etc.) and clean the
interior. Turn the impellers by hand to
check that they rotate freely.



Replace the drain filter correctly and
tighten it securely.



Close the drain pump access panel.



Risk of water damage.

Make sure the drain filter is securely
tightened. Otherwise there is a risk of
water leakage during use.
Replace the drain filter correctly and
tighten it securely.

Open the door



Danger of injury due to rotating

drum!
Reaching into a moving drum is
extremely dangerous.
Always make sure that the drum is
stationary before reaching in to
remove laundry.



Use a screwdriver to unlock the door.



Pull open the door.

Summary of Contents for WCE 660





































































































Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands

Miele WCE 660, Operating Instructions Manual

Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands