Miele WCE 660, Operating Instructions Manual

Page: 89 / 100

Settings
89
Code
The code prevents the washing
machine being used without your
knowledge.
Options
–
Activate
If you activate the code, you have to
enter a code after switching the
washing machine on. Otherwise it
cannot be operated.
The factory default code is 125.
–
Change
If wished, you can set a different
three-digit code.

Do not forget the code you have
set.
If you forget the code, only Miele
Technical Service can unlock the
washing machine.
Make a note of your new code.
– Deactivate
The washing machine is to be
operated again without entering a
code. This only appears if the code
had been activated previously.
Units
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
The factory setting is °C/Celsius.
Brightness
You can set the brightness of the
display, the sensor controls, and the
dimmed sensor controls.
Options
–
Display
Controls the brightness of the
display.
–
      
(dark)
–
      
(light) (factory setting)
– Buttons active
Controls the brightness of the
activated sensor controls.
–
      
(dark)
–
      
(factory setting)
–
      
(light)
– Buttons inactive
Controls the brightness of the sensor
controls that can be activated.
–        (dark)
–        (factory setting)
–        (light)
Tip: Ensure that there is a discernible
difference in brightness between the
activated and dimmed sensor controls.
This makes it easier to operate the
machine.