Miele WCE 660 Operating Instructions Manual Download Page 19

Page: 19 / 100

Before using for the first time

Miele@mobile App

The Miele@mobile App is available to
download free of charge from the Apple
App Store

or from the Google Play

Store™.

Connecting via WPS

Your WiFi router must support WPS
(WiFi Protected Setup).



Follow the instructions in the display.

If the connection fails, you have
probably not activated WPS on your
router quickly enough. Repeat the steps
above.

Tip:

If your WiFi router does not support

WPS, please connect via the
Miele@mobile app.

Connecting via the app

The Miele@mobile app can be used to
connect to your network.



Install the Miele@mobile app on your
mobile device.



Follow the instructions in the app.

To log in you will need:

1. Your WiFi network password

2. Your washing machine password

The password for your washing
machine consists of the last nine digits
on the serial number. These can be
found on the appliance's data plate.

If the connection is successful, the
following will appear in the display:

Connection OK











Confirm with

Summary of Contents for WCE 660





































































































Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands

Miele WCE 660, Operating Instructions Manual

Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands