Miele WCE 660 Operating Instructions Manual Download Page 50

Page: 50 / 100

Changing the programme sequence

Cancelling a programme

You can cancel a wash programme at
any time after it has started.



Touch the

Start/Stop

sensor.

The following will appear in the display:

Cancel programme











Touch the

sensor.

The suds will be pumped away. The
following will appear in the display:

Prog. cancelled











Wait until the door unlocks.



Pull open the door.



Remove the laundry.

Interrupting a programme



Turn the programme selector to the



position.

The washing machine switches off.



To continue: turn the programme
selector to the position of the wash
programme that was started.

Tip:



Cannot be changed

appears in

the display, the programme selector is
in the incorrect position.

Changing a programme

After the successful start of a
programme it is no longer possible to
change the programme.

Summary of Contents for WCE 660





































































































Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands

Miele WCE 660, Operating Instructions Manual

Search results

Summary of Contents for WCE 660

Reviews:

Related manuals for WCE 660

Brands by name

Popular brands