Miele W 3834 WPS Operating Instructions Manual Download Page 58

Page: 58 / 68

Water plus system

This is used to select the water intake
setting for the

Water plus

button.

There are three different options:

Setting 1 (the machine is delivered with
this option selected)

The water intake is increased in the
wash and rinse stages.

Setting 2:

An extra rinse is carried out.

Setting 3:

The water intake is increased in the
wash and rinse stages and an extra
rinse is carried out.

Follow steps

to programme

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The drum door is properly closed.

Press the

Start/Stop

button and keep

it pressed in whilst carrying out steps

Press the

I-On/0-Off

button in.

Wait until the indicator light for the

Start/Stop

button comes on . . .

. . . and then release the

Start/Stop

button.

– The

Buzzer

indicator light will flash

on and off once.

– A

will flash in the display

alternating with the number

Each subsequent press of the

Start/

Stop

button will select a different

setting.

The number alternating with the

the display refers to the settings as
follows:

= Setting 1 is selected

= Setting 2 is selected

= Setting 3 is selected

Switch the washing machine off with

I-On/0-Off

button.

The

Water plus

button has now been

allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.

Programmable functions

Summary of Contents for W 3834 WPS





































































Search results

Summary of Contents for W 3834 WPS

Reviews:

Related manuals for W 3834 WPS

Brands by name

Popular brands

Miele W 3834 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3834 WPS

Reviews:

Related manuals for W 3834 WPS

Brands by name

Popular brands