Miele W 3834 WPS Operating Instructions Manual Download Page 21

Page: 21 / 68

Automatic

7621

cold to 40°C

Max. load 3.5 kg

Fabric

Mixed loads of garments suitable for the

Cottons

and

Minimum iron/

Delicates

programmes. Sort according to colour.

Note

The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.

Cottons

9876

30°C to 95°C

Max. load 6.0 kg

Fabric

Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.

Note

–

Only use the

Cottons 95°C

programme for heavily soiled laundry.

Note for test institutes:

Programme setting for testing according to EN 60456 standard:

Cottons 60°C

Short programme: 3.0 kg load and

Light

Degree of soiling setting

Minimum iron/Delicates

ac421876

cold to 60°C

Max. load 3.0 kg

Fabric

Synthetics, mixed fibres and easy care cottons.

Curtains, including net curtains, specified as machine-washable by
the manufacturer.

Notes

–

Due to the large amount of fine dust in curtains, we recommend
selecting the

Heavy

Degree of soiling setting and also the

Water

plus

option. Only wash a maximum load of 2 kg.

–

For curtains which crease easily, reduce the spin speed or
deselect the spin.

Note for test institutes:

Programme setting for testing according to EN 60456 standard:

Minimum iron/

Delicates 40°C and spin speed of 1300 rpm

Woollens

/ac

cold to 40°C

Max. load 2.0 kg

Fabric

Machine-washable or hand-washable wool or wool blend fabrics. If
the care label does not specify a temperature, wash using the cold
setting.

Programme chart

Summary of Contents for W 3834 WPS





































































Search results

Summary of Contents for W 3834 WPS

Reviews:

Related manuals for W 3834 WPS

Brands by name

Popular brands

Miele W 3834 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3834 WPS

Reviews:

Related manuals for W 3834 WPS

Brands by name

Popular brands