Miele W 3834 WPS Operating Instructions Manual Download

Page: 19 / 68

The washing machine will adjust the
programme to suit the degree of soiling
selected.

Light

No visible dirt or stains.

The duration of the main wash is
reduced.

Normal

Visibly dirty and/or just a few slight
stains.

The standard wash programme will be
carried out.

Heavy

Visible dirt and stains and/or dried on
soiling.

A fifteen minute pre-wash will be
carried out and the duration of the main
wash will be increased by 15 minutes.

The

Pre-wash

Sequence indicator light

will flash. Add the appropriate amount
of powder detergent to compartment

You can also deactivate the Pre-wash
and increase the duration of the main
wash by 30 or 60 minutes instead of the
standard default increase of 15
minutes. See "Programmable functions".

Water plus

If the

Water plus

button is pressed, the

water level in the main wash and rinses
is increased.

You can also alter the setting allocated
to the

Water plus

button. See

"Programmable functions".

Buzzer

The buzzer will sound at the end of the
programme or when Rinse hold has
been reached.

The buzzer will sound repeatedly until
the machine is switched off.

Once switched on, the buzzer is active
in all programmes until it is switched off
again.

You can also change the volume of the
buzzer or deactivate the buzzer button.
See "Programmable functions".

The buzzer will always sound when
there is a fault, even if it has been
deactivated.

Degree of soiling, Water plus, Buzzer

Summary of Contents for W 3834 WPS





































































Search results

Summary of Contents for W 3834 WPS

Reviews:

Related manuals for W 3834 WPS

Brands by name

Popular brands

Miele W 3834 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3834 WPS

Reviews:

Related manuals for W 3834 WPS

Brands by name

Popular brands