4
Service
4.1
Motor/Cord Reel Cover Removal
A
Cover Frame Removal, 020 4.2.
A
Operating Unit Removal, 040 4.1.
A
Remove the T20 screw at the front of the motor cover (050 Fig. 2, Pos. 1).
A
Remove the motor cover as one piece.
Fig. 2
4.2
Motor Replacement
A
Motor/Cord Reel Cover Removal, 050 4.1
A
Disconnect the Molex plug from the motor.
A
Lift the motor straight out of the base.
A
Remove the white plastic motor bracket from the motor casing, along with the
two rubber cushions.
A
Use a flathead screwdriver to release the three clips holding the two casing
halves together.
A
Separate the casing halves and take out the motor.
A
Reinstall by following these instructions in reverse order.
Note
When reassembling, make sure that the motor wiring and the plug connection to
the operating unit are correctly installed in their guides.
Descriptive Technical Documentation
050-6
DTD no. 41-8000
This information should not be duplicated or passed on without Miele approval. All rights reserved.
07.06.2013, US_am
