A
Push the housing (060 Fig. 2, Pos. 3) into position.
A
Check for correct function.
4.3
LED Handle Battery Replacement (Model-Dependent)
Fig. 3:
Battery in LED Handle
Note
Three 1.5V AAA batteries required.
A
Remove the retaining screw (060 Fig. 3, Pos. 1) from the handle (060 Fig. 3,
Pos. 3).
A
Press the two locking tabs on the sides of the battery cover and remove the
cover (060 Fig. 3, Pos. 1).
A
Remove the battery holder (060 Fig. 3, Pos. 2).
A
Take the 3 old batteries out of the battery holder and insert the 3 new
batteries.
Observe polarity.
A
Re-install the battery holder. There is an arrow imprinted in the battery
compartment and on the battery holder that indicates which direction the
batteries must be facing.
A
Screw the cover back in place.
Descriptive Technical Documentation
060-4
DTD no. 41-8000
This information should not be duplicated or passed on without Miele approval. All rights reserved.
07.06.2013, US_am
