4.3
Lighting Assembly Replacement (Uniq Only)
A
Cover Frame Removal, 020 4.2.
A
Remove the bumper strip (010 Fig. 2, Pos. 2).
A
Remove the T20 screws securing the parking slots on either side of the base
(010 Fig. 2, Pos. 3).
A
Disconnect the lighting assembly wiring harness (010 Fig. 2, Pos. 5) from the
electronic board.
A
Remove each parking slot together with the lighting assembly (010 Fig. 2,
Pos. 4).
Fig. 2
Note
The lighting assembly can only be replaced in its entirety.
A
Reinstall by following these instructions in reverse order.
Descriptive Technical Documentation
DTD no. 41-8000
010-3
07.06.2013, US_am
This information should not be duplicated or passed on without Miele approval. All rights reserved.