4
Service
4.1
Telescopic Suction Hose Locking Piece Replacement
Fig. 1:
Telescopic Hose Locking Piece
A
Release the old locking piece with a small flathead screwdriver.
A
Remove the cap (060 Fig. 1, Pos. A). The pushbutton and spring underneath
will be released as well.
A
The insert (060 Fig. 1, Pos. B) will also come out when the locking piece is
removed.
A
When installing, first insert the pushbutton.
A
Press and hold the pushbutton while sliding the insert into the suction hose.
4.2
Pushbutton Replacement
Fig. 2:
Pushbutton
A
Pry off the old pushbutton with a small flathead screwdriver.
A
Place the bar (060 Fig. 2, Pos. 4) in its holder.
A
Place the spring (060 Fig. 2, Pos. 1) in its holder.
A
Place the pushbutton (060 Fig. 2, Pos. 2) on the bar.
Descriptive Technical Documentation
DTD no. 41-8000
060-3
07.06.2013, US_am
This information should not be duplicated or passed on without Miele approval. All rights reserved.
