4
Service
4.1
Operating Unit Removal
A
Dust Channel Assembly Removal, 030 4.3.
A
Take out the exhaust filter frame (and filter).
A
Cover Frame Removal, 020 4.2.
Warning!
To avoid damaging the lacquered surface, do not lever out the foot switch with
sharp tools (screwdriver, etc.).
A
Carefully lever out the two foot switches with a lid opener (mat. no. 05012752)
(040 Fig. 8).
Fig. 8:
Foot Switch Removal
A
Remove the three T20 screws (040 Fig. 9, Pos. 1).
A
Take out the parking slot trim (it will come out on its own).
A
Release the two front clips and one side clip with a small flathead screwdriver
(040 Fig. 9, Pos. 2), and remove the operating unit.
Descriptive Technical Documentation
040-8
DTD no. 41-8000
This information should not be duplicated or passed on without Miele approval. All rights reserved.
07.06.2013, US_am
