Additional settings
78
Moving a program: allocating program selection
buttons
You can sort the program selection list to suit your requirements and
therefore also allocate the program selection buttons
,
and
.
Open the
Additional settings
menu by switching the machine off with
the
button and then switch it on again with the
button whilst
keeping the
button pressed in.
Open the menu as follows:
Additional settings
Move program
Move program
Regular
Normal
2.
1.
All enabled programs are shown in the program list (see "Further
settings/Enabling programs"). A program's position in the program list
is the determining factor for assigning the program selection buttons.
Programs are numbered from 1 - n. The first three programs in the list
are assigned to the program selection buttons; for example:
–
1. Normal
on program selection button
–
2. Regular
on program selection button
–
3. Extended
on program selection button
–
4. Demineralized rinse
–
5. Rinse
– etc.
Use the
and
arrow buttons to select the program you would
like to move.
Confirm your selection with
OK
.
Now you can move this program within the list.
Use the
and
arrow buttons to move the program to the
position you want.
Press
OK
to save the program to the selected position.
The program which was previously saved to this position and all
subsequent programs are moved down by one position.
The process can be repeated as often as you wish.
Press the
button to exit the menu.
