Operation
60
Cancelling a program
Be careful when opening the door.
The wash load could be hot. Danger of scalding, burning, and
chemical burns.
Program
cancelled due to a
fault
The program stops and an error message appears in the display.
Take appropriate steps to resolve the fault, depending on its cause
(see "Problem-solving guide").
Cancelling a
program manually
A program which is already running should only be cancelled if strictly
necessary, e.g. if the wash load is moving about significantly.
Press and hold the
Start/Stop
button until the display changes to
the following view:
Cancel program
No
Yes
Use the
and
arrow buttons to select the
Yes
option.
Confirm the selection with
OK
; this will cancel the program.
Selecting
No
will cause the program to continue without interruption.
If no button is pressed for several seconds, or if the process is
cancelled using the
button, the display will revert to the program
sequence display.
Restarting the
program
Before starting the program, check to see whether any more
powder cleaning detergent is required (only applicable for machine
version with powder dispenser).
Start the program again or select a new program.
