Installation
118
Installation and levelling
Please refer to the installation diagram provided.
In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.
The machine must be stable and horizontal.
You can compensate for any unevenness in the floor level and height
of the machine by adjusting the four feet. The feet can be screwed
out to a maximum of 60 mm.
Do not lift the machine by protruding parts such as the control
panel.
They could be damaged or torn off.
The machine is suitable for the following types of installation:
– Freestanding.
– Slot-in:
The machine can be installed beside other appliances or furniture
or in a suitable niche. The niche must be at least 600 mm wide and
600 mm deep.
– Built-under:
The machine can be built under a continuous worktop. The space
provided must be at least 600 mm wide, 600 mm deep and
820 mm high.
