Operation
58
Program sequence indicator
After the program has started, the program sequence can be followed
in the three-line display.
Normal
Main wash
Time left
Min
15
Top line
– Program name.
Middle line
The following parameters can be checked using the arrow buttons
and
:
– Current program block, e.g.
Main wash
,
– Actual or required temperature
(depending on the display set, see "Further settings/Display:
Temperature"),
– Cycle number,
Bottom line
– Time left (in hours; under an hour, in minutes)
End of program
The following messages and parameters appear at the end of a
program:
Top line
– Program name.
Middle line
– Temperature
(required temperature of the final wash phase)
Bottom line
– Program finished.
The LED in the
Start/Stop
button goes out as well. In the factory
default state, an acoustic tone also sounds for approx. 10 seconds
(see "Settings
/Volume").
Ending the
program
Open the door to end the program. The machine must be switched
on when you do this.
