Problem solving guide
110
Problem
Possible cause and remedy
The cleaning result is
unsatisfactory.
Wash carts, baskets, modules and inserts were not suitable
for the load.
Select wash carts, baskets, modules and inserts which
are suitable for the task.
Wash carts, baskets, inserts and modules were incorrectly
loaded or overloaded.
Arrange the wash load correctly according to the
information in the Operating instructions.
Avoid overloading the wash carts, baskets, modules and
inserts.
The program was not suitable for the soiling.
Select a suitable program.
or
Adjust the parameters to suit the task.
A spray arm is blocked.
Ensure the spray arms are not obstructed when
arranging the wash load.
Injector nozzles on the wash carts, baskets, modules or
inserts are blocked.
Check the nozzles and clean them as necessary.
The filters in the wash cabinet are dirty.
Check the filters and clean them if necessary.
Wash carts, baskets or modules were not correctly
mounted on the water connection.
Check the adapter.
Items made of glass are
showing signs of
corrosion.
The items are not suitable for machine reprocessing.
Only use items which are declared by their manufacturer
as suitable for machine reprocessing.
Neutralization has not taken place during the program.
Dispense using the DOS 2 reservoir
in the door:
Refill the reservoir with neutralizing agent.
- Dispense via an external container:
Check the level in the supply container and vent the
dispensing system if necessary.
The wash temperature was too high.
Select a different program.
or
Reduce the wash temperature.
Cleaning detergents used were too alkaline.
Use a milder cleaning detergent.
or
Reduce the concentration of the cleaning detergent.
