Problem solving guide
109
Unsatisfactory cleaning and corrosion
Problem
Possible cause and remedy
There are white deposits
on the wash load.
The water softener is set too low.
Set the water softener to the correct water hardness.
There is no salt in the salt reservoir.
Refill with reactivation salt.
The quality of the water for the final rinse was insufficient.
Use demineralized water (DI) with a low conductivity.
If the machine is connected to a water demineralization
cartridge, check the conductivity level and replace resins
as necessary. If the machine is connected to a DI water
purification system, consult the manufacturer of the
purification system.
The water from the DI water connection is not sufficiently
demineralized.
Check the external demineralization system. If
necessary, replace the demineralization cartridge with a
new one.
