Miele PDR 908 HP Marine Operating And Installation Instructions Download

Page: 30 / 108

3. Selecting a programme

Switch on the tumble dryer



Press the



control.

The drum lighting will come on.

The drum lighting will automatically go
out after a few minutes and/or after
the start of a programme to save en-
ergy.

Selecting a programme



11:02







Programmes

Favourites

Supervisor

Help

There are different ways to select a pro-
gramme.



Touch the



Programmes

sensor.



11:02

Shirts

Cottons

Express

Denim

Delicates

Programmes

Minimum iron



Scroll to the right in the display until
the programme you want appears.



Touch the sensor for that programme.

The display will change to the standard
menu for that drying programme.

Alternatively, you can select a pro-
gramme via:



Favourites*.

* The preset programmes under

Fa-

vourites

cannot be changed.



Touch the

 Favourites

sensor.



11:02

Cottons

Favourites

Delicates





Cottons







Scroll to the right in the display until
the programme you want appears.



Touch the sensor for that programme.

The display will change to the standard
menu for that drying programme.

Summary of Contents for PDR 908 HP Marine













































































































Search results

Summary of Contents for PDR 908 HP Marine

Reviews:

Related manuals for PDR 908 HP Marine

Brands by name

Popular brands

Miele PDR 908 HP Marine, Operating And Installation Instructions

Search results

Summary of Contents for PDR 908 HP Marine

Reviews:

Related manuals for PDR 908 HP Marine

Brands by name

Popular brands