Miele PDR 908 HP Marine Operating And Installation Instructions Download

Page: 34 / 108

6. End of programme – unloading the drum

End of programme

The laundry will be cooled down shortly
before the end of the programme. The
laundry can be unloaded.

–

Finish

lights up

Anti-crease



* was selected, the

drum will rotate in intervals. This minim-
ises creasing if the laundry cannot be
removed from the machine immediately.

* The anti-crease function is deactiv-
ated as standard.

The tumble dryer will switch off auto-
matically 15 minutes after the end of a
programme.

Unloading the drum



Open the door.



Remove everything from the drum.

Items left in the tumble dryer could
be damaged by overdrying when the
tumble dryer is used the next time.
Always remove all items from the
drum.



Switch the tumble dryer off.

Observe any maintenance
notes

This tumble dryer requires regular
maintenance, particularly if it is used
on a continuous basis.

Tip:

Please see “Cleaning and care” for

details. Read the “Cleaning the appli-
ance at the correct intervals” section
first.

Summary of Contents for PDR 908 HP Marine













































































































Search results

Summary of Contents for PDR 908 HP Marine

Reviews:

Related manuals for PDR 908 HP Marine

Brands by name

Popular brands

Miele PDR 908 HP Marine, Operating And Installation Instructions

Search results

Summary of Contents for PDR 908 HP Marine

Reviews:

Related manuals for PDR 908 HP Marine

Brands by name

Popular brands