Problem solving guide
66
Message
Cause and remedy
lights up in the
display.
The
Replace filter reminder
setting has been
activated. This is the reminder to change the filter
(Active AirClean).
Replace the filter in the holder (see “Cleaning and
care - Replacing the filter”).
Reset the counter (see “Selecting further settings -
Filter replacement indictor
”).
The power failure
symbol
,
appears in
the display and the
alarm tone sounds.
The temperature display
will show the warmest
temperature recorded in
the freezer during a
power failure or an
interruption to the
power supply.
Indication of an
power failure
: the temperature in the
appliance over the last few days or hours has risen
too high because of a power failure or interruption to
the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
Press the Alarm off button.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer section.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
“
F0
to
F9
” appears in
the display.
There is a fault.
Call the Miele Service Department.
“
FE*
” appears in the
display.
There is a fault.
Call the Miele Service Department.
The
symbol lights up
in the display, the
appliance does not get
cold, although the
controls and the interior
lighting are working.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
Switch off Demo mode (see “Information for
dealers - Demo mode”).
Summary of Contents for KFN 37432 iD
Page 101: ......
Page 102: ......
Page 104: ...M Nr 10 951 260 01 en GB KFN 37432 iD KFNS 37432 iD ...
