Miele KFN 14827 SDE ed/cs Page 70 Operating And Installation Instructions Download

Page: 70 / 88

Attaching the connecting panel will
align the appliances in depth.
If one of the appliances protrudes
further forward than the other, start with
the further forward appliance:

Position the connecting panel

that the vertical slots are on the side
of the panel which will be attached to
an appliance first. Attach it loosely
with two screws

Push connecting panel

until the

central stay on the bracket touches
the side of the appliance.

Now tighten both screws

Secure connecting panel

to the

other appliance. To do this push the
appliances together a little, as
necessary.

Installation steps at the back of the
appliances

Fit connecting bracket

onto the

top of the sides in the middle.

Fit connecting piece

into the

relevant gap below.

Tighten connecting piece

using

screw

supplied.

Warning: Do not drill a hole in the
appliance for this screw.

To avoid vibrations, the connecting
bracket, connecting piece and
screw must not touch the pipework
at the back of the appliances.

Installing in a side-by-side combination

Summary of Contents for KFN 14827 SDE ed/cs

























































































Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands

Miele KFN 14827 SDE ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands