Miele KFN 14827 SDE ed/cs Page 19 Operating And Installation Instructions Download

Page: 19 / 88

To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18°C.

To switch between the PerfectFresh
zone and freezer section touch the
relevant sensor.

If you want to select the freezer section
(to check the temperature, for
example),

touch the freezer sensor. It will light
up yellow.

Depending on which zone/section you
have selected, you can

– select either Super cool or Super

freeze, or

– adjust the temperature.

Please refer to the relevant section for
more information.

Cool pack

Place the cool pack in the top freezer
drawer. The cool pack will be at its
most effective after it has been in the
freezer for approx. 24 hours.

Switching off

Touch the On/Off sensor until all of
the indicators go out. (If this does not
happen, the safety lock is still
activated).

If the PerfectFresh zone is switched on,
the PerfectFresh zone and the freezer
section will switch off one after the
other.

The interior lighting will not come on
when you open the door and the
cooling process will be switched off.

To switch the PerfectFresh zone off
separately

The PerfectFresh zone can be switched
off without having to switch off the
freezer section. This is useful e.g. whilst
on holiday.

Select the PerfectFresh zone.

The "PerfectFresh" symbol will light up
yellow.

Switching on and off

Summary of Contents for KFN 14827 SDE ed/cs

























































































Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands

Miele KFN 14827 SDE ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands