Miele KFN 14827 SDE ed/cs Page 28 Operating And Installation Instructions Download

Page: 28 / 88

Door alarm

The alarm will sound if a door is left
open for more than approx. 2 minutes.

The alarm off sensor will light up red
and the symbol for the section which
has the opened door will flash.

The alarm will stop and the symbols will
go out as soon as the door is closed.

Switching the door alarm off
early

If the noise of the door alarm disturbs
you, you can switch it off early if you
wish.

Touch the alarm off sensor.
The alarm will stop.
The alarm off sensor will light up
constantly and the symbol for the
section which has the opened door
will continue to flash until the door
has been closed.

Alarm

Summary of Contents for KFN 14827 SDE ed/cs

























































































Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands

Miele KFN 14827 SDE ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands