Miele KFN 14827 SDE ed/cs Page 18 Operating And Installation Instructions Download | Manualshive

Page: 18 / 88

background image

Before using for the first time

Packing material

^

Remove all the packing material from
the interior of the appliance.

Protective foil

On stainless steel appliances, the outer
surfaces are also covered with
protective foil.

^

Do not remove the foil until the
appliance has been positioned in its
final location.

Cleaning and care

Please observe the relevant
instructions in "Cleaning and care".

^

On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
removed the protective foil.
The appliance doors have a special
finish which is resistant to soiling.

Do

not use

Miele stainless steel

conditioner on the appliance door.

Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.

^

Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.

Active charcoal filters
(Active Air Clean charcoal filters)

^

Place the active charcoal filters
supplied in the holder, and place the
holder on one of the shelves in the
PerfectFresh zone (see "Active
charcoal filters").

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.

Switching on

The PefectFresh zone and freezer
section are switched on together with
the On/Off sensor.

^

Touch the On/Off sensor until the
temperature display lights up.

If the temperatures in the appliance are
not within the range that the appliance
is able to display, only bars will light up
in the temperature displays.

The "PerfectFresh" and the "Freezer"
symbols as well as the Alarm off sensor
will flash until the temperatures are
sufficiently low.

As soon as the temperatures are within
the range that the appliance is able to
display, the temperature display will
show the current temperature.

The appliance will start to cool, and the
interior lighting will come on when the
PerfectFresh zone door is opened.

Switching on and off

18

«
...
16
17
18
19
20
...
»

Summary of Contents for KFN 14827 SDE ed/cs

























































































Reviews:

No comments

Related manuals for KFN 14827 SDE ed/cs

Brand: Haier Pages: 23

Brand: Haier Pages: 88

Brand: Haier Pages: 7

U-2218RGLINT-00A

Brand: U-Line Pages: 13

Brand: Jenn-Air Pages: 106

Brand: Koncar Pages: 69

50's Style FAB38RPB

Brand: Smeg Pages: 30

Brand: Zanussi Electrolux Pages: 20

Brand: U-Line Pages: 50

Brand: IKEA Pages: 36

Brand: Danby Pages: 28

Brand: VOX electronics Pages: 186

Brand: Maytag Pages: 24

600 Series BI-42SD

Brand: Wolf Pages: 2

Brand: Fagor Pages: 68

Brand: JUNO Pages: 12

Brand: Schaub Lorenz Pages: 56

Brand: Haier Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands