Miele KFN 14827 SDE ed/cs Page 15 Operating And Installation Instructions Download

Page: 15 / 88

Stainless steel appliances

Do not use sticky notes, transparent adhesive tape, masking tape

or other types of adhesive on the surface of the door. These
damage the surface, causing it to lose its dirt-repellent protective
coating.

The high-quality surface of the door is susceptible to scratching.

Even fridge magnets can cause scratching.

Transporting the appliance

Always transport the appliance in an upright position and in its

original transport packaging to prevent damage in transit.

Danger of injury and damage. The appliance is heavy and must

be transported by two people.

Disposal of your old appliance

Before disposing of an old appliance, first make the door latch or

lock unusable.
This way you will prevent children from accidentally locking
themselves in and endangering their lives.

Be careful not to damage any part of the pipework whilst awaiting

disposal, e.g. by

– puncturing the refrigerant channels in the evaporator.

– bending any pipework.

– scratching the surface coating.

Splashes of refrigerant can damage the eyes.

Warning and Safety instructions

Summary of Contents for KFN 14827 SDE ed/cs

























































































Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands

Miele KFN 14827 SDE ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14827 SDE ed/cs

Reviews:

Related manuals for KFN 14827 SDE ed/cs

Brands by name

Popular brands