Miele KFN 14827 SDE ed/cs Page 13 Operating And Installation Instructions Download | Manualshive

Page: 13 / 88

background image

Correct use

~

Never handle frozen food with wet hands. Your hands may freeze

to the frozen food. Danger of frost burn.

~

Do not take ice cubes out with your bare hands and never place

ice cubes or ice lollies in your mouth straight from the freezer.
The very low temperature of the frozen ice or lollies can cause frost
burn to the lips and tongue.

~

Do not refreeze partially or fully defrosted food. Consume

defrosted food as soon as possible, as it will lose its nutritional value
and spoil if left for too long. Defrosted food may only be re-frozen
after it has been cooked.

~

Do not store explosive materials in the appliance or any products

containing propellants (e.g. spray cans). Thermostats switching on
may produce sparks which could present a fire hazard. Flammable
compounds could explode.

~

Do not operate any electrical equipment (e.g. an electric

ice-cream maker) inside the appliance. Danger of sparking and
explosion.

~

Do not store cans or bottles containing carbonated drinks or

liquids which could freeze in the freezer. The cans or bottles could
explode. Danger of injury and damage to the appliance.

~

When cooling drinks quickly in the freezer, make sure bottles are

not left in for more than one hour; otherwise they could burst,
resulting in injury or damage.

~

Observe the "use-by" dates given on food to avoid the risk of food

poisoning.
Storage times will depend on several factors, including the
freshness and quality of the food as well as the temperature at which
it is stored. Follow the instructions given on the food manufacturer's
packaging regarding storage conditions and "use-by" dates.

Warning and Safety instructions

13

«
...
11
12
13
14
15
...
»

Summary of Contents for KFN 14827 SDE ed/cs

























































































Reviews:

No comments

Related manuals for KFN 14827 SDE ed/cs

Brand: Cafe Pages: 44

Brand: Magic Chef Pages: 6

Brand: TCL Pages: 44

Brand: NEFF Pages: 32

TT TU 133 F S180C

Brand: VALBERG Pages: 26

Brand: Ravanson Pages: 87

Brand: Midea Pages: 68

Brand: STATESMAN Pages: 16

Brand: Tricity Bendix Pages: 20

170 L COLD GOLD DELUXE

Brand: Godrej Appliances Pages: 20

Brand: VALPRO Pages: 31

Brand: Randell Pages: 2

Brand: Concept2 Pages: 64

Brand: Magic Chef Pages: 7

Brand: Fagor Pages: 28

Brand: Oursson Pages: 28

PSHS6TGXSS - Profile 26' Dispenser...

Brand: GE Pages: 132

PSS26NHPACC and

Brand: GE Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands