manualshive.com logo in svg

Miele H 7364 BP, Operating And Installation Instructions, Page: 66 / 136

Share
Download
Miele H 7364 BP Operating And Installation Instructions Download Page 66

Moisture plus

66

Starting residual water evaporation
immediately

Danger of injury caused by

steam.
Steam can cause severe scalding.
Do not open the door whilst steam is
being released.

Select a function or an automatic
programme that uses moisture.

The prompt 

Evaporate res. moisture?

 will

then appear.

Select 

Yes

.

Evaporate residual moisture

 and a time

then appear in the display.

The residual water evaporation will then
start. You can follow the time counting
down in the display.

The time shown in the display will
depend on the amount of residual water
left in the steam injection system.
During the evaporation process, the
duration may be adjusted by the system
according to the amount of water
currently present.

At the end of the residual water
evaporation process, a buzzer will
sound and 

Finished

 will appear.

You can now select a function to start a
cooking process or run an automatic
programme with added moisture.

Whilst residual water is evaporating,
moisture will condense on the door
and in the oven compartment. It is
absolutely essential to remove this
moisture after the oven has cooled
down.

Skipping residual water evaporation

Allowing further intake of water can,
under extremely adverse
circumstances, cause water to
overflow from the steam injection
system into the oven compartment.
It is therefore best not to cancel the
evaporation process.

Select a function or an automatic
programme that uses moisture.

Evaporate res. moisture?

 appears.

Select 

Skip

.

A cooking programme using a function
or an automatic programme with
moisture assistance can now be run.

You will be prompted to carry out the
evaporation of residual water the next
time you select the function or an
automatic programme that uses
moisture assistance and when you
switch the oven off.

Summary of Contents for H 7364 BP









































































































































Reviews:

No comments