manualshive.com logo in svg

Miele H 7364 BP, Operating And Installation Instructions, Page: 57 / 136

Share
Download
Miele H 7364 BP Operating And Installation Instructions Download Page 57

Operation

57

Booster

The 

Booster

 function is used to quickly

pre-heat the oven compartment.

This function is switched on as the
factory default setting for the following
functions (

Further

 

 | 

Settings

 

 |

Booster

 | 

On

):

–

Fan plus

 

–

Conventional heat

 

–

Auto roast

 

–

Moisture plus

 

If you set a temperature above 100 °C
and the 

Booster

 function is switched on,

a rapid heating-up phase heats the
oven compartment to the set
temperature. The top heat/grill element
and the ring heating element come on
together with the hot air fan.

Delicate items (e.g. sponge or
biscuits) will brown too quickly on
the top if the 

Booster

 function is

used.
Switch off the 

Booster

 function for

these items.

Switching the Booster on and off for
a cooking programme

If you have selected the 

Booster

 | 

On

setting, you can switch off the function
separately for a cooking programme.

On the other hand, you can also switch
on the function separately for a cooking
programme if you have selected the

Booster

 | 

Off

 setting.

Example: you have selected a function
and the required settings such as the
temperature.
You want to switch off the

Booster

 function for this cooking

programme.

Select the 

 sensor control.

Select 

Booster

 | 

Off

.

Confirm with 

OK

.

The 

Booster

 function is switched off

during the heating-up phase. Only the
heating elements associated with the
function are pre-heating the oven
compartment.

Summary of Contents for H 7364 BP









































































































































Reviews:

No comments