Miele H 7364 BP, Operating And Installation Instructions, Page: 64 / 136

Moisture plus
64
Releasing bursts of steam

Danger of injury caused by
steam.
Steam can cause severe scalding.
In addition, steam condensing on the
control panel will cause the sensor
controls and the touch display to
react more slowly.
Do not open the door whilst steam is
being released.
Automatic burst of steam
Once the heating-up phase has been
completed, the automatic burst of
steam is injected.
The water will vaporise in the oven
compartment.
 and
Burst of steam
active appear in the display.
Following steam injection,  and
Burst
of steam active disappear.

Continue cooking until the end of the
cooking duration.
Manual bursts of steam
The bursts of steam can be injected as
soon as the
 sensor control lights up
in the display.
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip: For tips on when to inject the
steam, please refer to the recipes in the
cookbook supplied with the oven or to
the Miele@mobile app. Use the
Minute
minder
 function to remind you when
to inject the steam.

Select the

sensor control.
The burst of steam is injected.

and
Burst of steam active will appear in the
display and the

sensor control will go
out.
 Proceed as described to inject further
bursts of steam as soon as the
 sensor control lights up.
After the last burst of steam is injected,
the

sensor control, the message and

all disappear from the display.

Continue cooking until the end of the
cooking duration.
Time-controlled bursts of steam
The oven will inject steam at the set
times.

and Burst of steam active appear when
the steam is being injected.
After the last burst of steam is injected,

and Burst of steam active disappear.
 Continue cooking until the end of the
cooking duration.