manualshive.com logo in svg

Miele H 7364 BP, Operating And Installation Instructions, Page: 108 / 136

Share
Download
Miele H 7364 BP Operating And Installation Instructions Download Page 108

Problem solving guide

108

Problem

Cause and remedy

The sensor controls do
not respond.

You have selected the 

Display

 | 

QuickTouch

 | 

Off

 setting.

When the oven is switched off, the sensor controls do
not respond.

As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor
controls to respond even when the oven is
switched off, select the 

Display

 | 

QuickTouch

 | 

On

setting.

The oven is not connected to the power supply.

Check that the oven plug is correctly inserted into
the socket and switched on.

Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.

There is a fault with the controls.

Touch and hold the 

 On/Off button until the

display switches off and the oven restarts.

Press OK for 6 seconds to
unlock

 appears in the

display when the oven
is switched on.

The 

 system lock has been activated.

You can deactivate the system lock for a
programme by touching the 

OK

 sensor control for

at least 6 seconds.

If you want to permanently deactivate the system
lock, select the 

Safety

 | 

System lock 

 | 

Off

 setting.

Power cut -process
cancelled

 appears in the

display.

There has been a brief power cut. This has caused
the current cooking programme to stop.

Switch the oven off and then back on again.

Restart the cooking programme.

12:00

 appears in the

display.

The power supply was interrupted for longer than
150 hours.

Reset the time and date.

Maximum operating hoiurs
reached

 appears in the

display.

The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.

Confirm with 

OK

.

The oven is now ready to use.

Summary of Contents for H 7364 BP









































































































































Reviews:

No comments