Miele H 4331 Operating And Installation Manual Download Page 53

Page: 53 / 84

Grill with the oven door closed.
If you grill with the door open, hot air
will escape from the oven instead of
being cooled automatically by the
cooling fan. Oven controls could get
hot. Danger of burning!

Always use the roasting filter when
grilling.

Grill settings

Grill

For grilling thin cuts and for browning
food. The inner part of the upper
heating element gets hot.

Grill - full

For grilling large quantities of thin cuts
and for browning food in large dishes.
The whole of the grill element gets hot.

Fan grill

For grilling larger items, e.g. rolled
meat, poultry.

Always use the roasting filter when
grilling.

Preparing food for grilling

Clean, wipe dry and season with
pepper and herbs. Do not season meat
with salt before grilling as this draws
the juices out.

Add a little oil if necessary. Do not use
other types of fat as they can get too
dark, burn and cause smoke.

Clean fish in the normal way. To
enhance the taste, add a little salt or
squeeze a little lemon juice over the
fish.

Grilling

Summary of Contents for H 4331





















































































Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands

Miele H 4331, Operating And Installation Manual

Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands