Miele H 4331 Operating And Installation Manual Download Page 35

Page: 35 / 84

Switching off automatically

To switch a programme off
automatically a duration has to be
entered. The following example shows
the programming for a cake using Fan
plus

at 160 °C for 45 minutes.

Place the cake in the oven and close
the door.

Select the Fan plus and set the
temperature.

f g )

Turn the multi-function selector until
triangle

is underneath the

symbol in the display.

Press the multi-function selector
gently.

0:00

and the actual temperature in the

oven (e.g. 23 °C).will appear in the
display.

Whilst triangle

is flashing, enter

the required duration in hours and
minutes.

After entering the data

– the temperature rise can be followed

in the display,

– as well as the duration counting

down in minutes, if no other functions
are called up.
The last minute will count down in
seconds.

Entering a cooking duration

Summary of Contents for H 4331





















































































Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands

Miele H 4331, Operating And Installation Manual

Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands