Miele H 4331 Operating And Installation Manual Download Page 40

Page: 40 / 84

The

cooking programme will stop

, if

– the programme selector is not turned

back to the original programme
setting within 10 seconds.

– the programme selector is turned to

"0".

Turning the programme selector to
the "0" position at the end of a
locked programme, or after
interrupting a programme will not
release the safety lock.

In order

to start a cooking

programme again

you will have to

Turn the programme selector to "0".

De-activate the safety lock/system
lock. Call up symbol

, and turn

the multi-function selector
anti-clockwise until four horizontal
bars appear in the display.

De-activating the safety lock

Temperatures and times cannot be
changed during a programme if the
safety lock has been activated.

To switch it off:

Call up the

symbol.

Turn the multi-function selector
anti-clockwise until four horizontal
bars appear in the display.

The safety lock has now been
de-activated and you can change
settings.

Safety lock

Summary of Contents for H 4331





















































































Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands

Miele H 4331, Operating And Installation Manual

Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands