Use oven gloves when placing
food in the oven, turning or
removing it and when adjusting shelves
etc in a hot oven.
When using "Conventional" heating or
when grilling the element in the roof of
the oven and the roof liner become very
hot.
The oven door gets much hotter
during pyrolytic operation than
during normal use.
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
Remove all accessories as well as
the runners and any extra
accessories such as, for example, the
baking carriage, or telescopic runners
from the oven interior before starting
the pyrolytic cleaning process. The
high temperatures needed for pyrolysis
will damage the accessories and cause
irreparable damage to the baking
carriage and telescopic runners.
Do not use plastic containers.
These melt at high temperatures
and could damage the oven.
Do not heat up unopened tins or
jars of food in the oven, as
pressure can build up and they may
explode resulting in injury or damage.
Do not push pots and pans around
on the oven floor, as this could
damage the surface.
Do not lean or sit on an open oven
door, or place heavy items on it.
This could damage the appliance. The
oven door can support a maximum load
of 15 kg.
To prevent the risk of damage
when closing the oven door, hold
the handle firmly and do not let go of it
until it is shut. Make sure that nothing
gets trapped between the door and the
oven.
Cover any food which is left in the
oven to be kept hot. Any moisture
in the food could lead to corrosion
damage in the oven. This also prevents
the food from drying out.
If you wish to complete a cooking
process using the residual heat in
the oven, do not switch the appliance
off.
Leave the programme selector at the
position set and select the lowest
temperature.
Do not switch the appliance off until the
food has been removed. Moisture in the
oven could lead to condensation
forming on the control panel and
surrounding kitchen furniture and drops
of moisture collecting under the
worktop.
Condensation can:
– damage the housing unit / worktop.
– lead to corrosion in the oven.
On models fitted with a catalyser, it
could also result in deposits remaining
in the catalyser, causing an unpleasant
smell to arise the next time the
appliance is switched on.
Warning and Safety instructions
13
Summary of Contents for H 4331
Page 2: ...2 ...
Page 82: ...82 ...
Page 83: ...83 ...
Page 84: ...Alteration rights reserved 22 1607 H 4331 H 4431 M Nr 07 087 910 00 en GB ...
