Miele H 4331 Operating And Installation Manual Download Page 81

Page: 81 / 84

To ensure adequate ventilation to the
oven once installed:
-

provide a ventilation cut-out in
the housing unit as illustrated.

do not fit a rear panel into the
housing unit.

do not fit insulation material
inside the housing unit.

Important:
Remove the protective cork spacers
from the sides of the oven before
installation.

Turn off the mains electricity supply
to the isolator.

Connect the mains cable from the
oven to the isolator.

Push the oven into the furniture
housing unit as far as the oven trim,
and align it.

Open the oven door, and with two
screws secure the oven to the side
walls of the furniture housing unit
through the holes in the oven trim.

Reconnect the electricity supply to
the isolator.

The appliance must only be
operated when it has been built in.
Otherwise it poses an electric shock
hazard.

Installing the oven

Summary of Contents for H 4331





















































































Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands

Miele H 4331, Operating And Installation Manual

Search results

Summary of Contents for H 4331

Reviews:

Related manuals for H 4331

Brands by name

Popular brands