![background image](http://html.mh-extra.com/html/miele/g-811/g-811_operating-instructions-manual_234853043.webp)
Problem
Possible cause
Remedy
The dishes are not
clean.
The dishes were not
loaded correctly.
See “Loading the dish-
washer”.
–
Were the dishes
placed inside of each
other?
–
Could water reach all
surfaces?
The water feed for the
middle spray arm was
covered.
Make sure that dishes
placed at the rear of the
upper basket do not
cover the water feed
tube.
Not enough detergent
was used.
Use more detergent; see
“Adding detergent”.
The program selected
was not intensive enough.
Select a more intensive
program; see the “Pro-
gram chart” for guide-
lines.
The spray arm jets are
clogged.
Clean the spray arms;
see “Cleaning the spray
arms”.
The combination filter in-
side the dishwasher is
clogged or not seated
correctly.
Clean and/or reseat the
filter. See “Cleaning and
care”.
The drain pump or
non-return valve may be
blocked.
See “Cleaning the drain
pump and non-return
valve”.
Not enough water may be
entering the dishwasher.
See “Checking the water
level”, increase the water
intake time if needed.
Problem solving guide
43
Summary of Contents for G 811
Page 57: ...57 ...
Page 58: ...58 ...
Page 59: ...59 ...
Page 60: ...M Nr 05 466 840 01 en US Alterations reserved 1906 G 811 G 814 ...