Miele G 811, Operating Instructions Manual

Page: 15 / 60

^
Press the “Top Solo” button.
The “Top Solo” indicator lights.
^
Turn the program selector to “Stop”.
^
Turn off the dishwasher.
The water hardness level is now stored
in the program memory.
Setting the water hardness selector
in the wash cabinet
The water hardness level selector in the
wash cabinet must be set according to
the following table.
Selecting the correct setting will help
minimize the effects of dishwashing on
glass surfaces. Too high a setting will
lead to poor cleaning results and an in-
crease in water spots left on dishes and
cutlery.
^
Use a screwdriver to take the cover
off the water hardness selector in the
wash cabinet.
^
Use a coin or screwdriver to adjust
the water hardnesss selector in the
wash cabinet. There is a click as
each setting is reached.
gr/gal ppm Selector setting
1 - 8 20 - 140 3
9 - 11 160 - 200 2
12 - 16 220 - 290 1
17 - 70 310 -1260 0
The water hardness selector is preset
to setting 3.
Example:
If the water hardness level is 9 gr/gal
select setting 2 (9 - 11 gr/gal).
^
Make sure the cover to the salt reser-
voir is returned.
Before using for the first time
15