Miele G 7961 Operating Instructions Manual Download Page 85

Page: 85 / 120

Frequently Asked Questions

Fault in the AutoDos (automatic dispensing)

Problem

Possible cause and solution

The following message
appears on the display:

Insert PowerDisk or deacti-
vate AutoDos with OK.

The

AutoDos

function is active but no PowerDisk has

been inserted.



Insert a PowerDisk (see “Automatic dispensing/
AutoDos” under “Detergent”).



If you do not wish to use AutoDos, deactivate the
function using

The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The program does not
start or a program that
has already started
stops.
The following message
appears on the display:

AutoDos lid open

The AutoDos lid has not been closed properly.



Close the AutoDos lid and lock it fully (see “Auto-
matic dispensing/AutoDos” under “Detergent”).



If the lid cannot be fully closed, check whether the
PowerDisk holder is lying flat (see “Inserting a
PowerDisk” under “Detergent”).



If the same fault message appears again, contact
Miele Technical Service.

The following message
appears on the display:

PowerDisk empty. Deacti-
vate AutoDos with OK.

The

AutoDos

function is active and the PowerDisk is

empty.



Replace the PowerDisk (see “Automatic dispens-
ing/AutoDos” under “Detergent”).
If you do not wish to use AutoDos, deactivate the
function using

The message

PowerDisk empty. Deacti-
vate AutoDos with OK.

ap-

pears in the display
even though you have
inserted a new Pow-
erDisk.

The dishwasher was turned off when the PowerDisk
was replaced and it has therefore not recognized the
new PowerDisk.



Turn the dishwasher on before replacing the Pow-
erDisk (see “Automatic dispensing/AutoDos” and
“Inserting a PowerDisk” under “Detergent”).

Summary of Contents for G 7961

























































































































Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands

Miele G 7961, Operating Instructions Manual

Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands