Miele G 7961 Operating Instructions Manual Download Page 106

Page: 106 / 120

Settings

106

AutoDos (AutoDos)

If you later wish to change the fill level
or dispensing amount of the PowerDisk,
you can adjust the pre-set values ac-
cording to the information on the pack-
aging.

These settings are important in order for
the

PowerDisk almost empty

message to

be displayed correctly. These settings
have no influence on the amount of de-
tergent dispensed in each rinse pro-
gram.

Setting the PowerDisk fill level

The PowerDisks currently available con-
tain 400 g of detergent.



Select the

PowerDisk fill level

menu op-

tion and confirm with



Enter the PowerDisk fill quantity and
confirm with

Setting the Dosage amount

The PowerDisks currently available dis-
pense approximately 7 g of detergent
per rotation.



Select the

Dosage amount

menu op-

tion and confirm with



Select the dispensing quantity of the
PowerDisk and confirm with

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.

The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.

If spots appear on dishes and glass-
ware:

- Increase the rinse aid dosage.

If clouding or smearing appears on
dishes and glassware:

- Decrease the rinse aid dosage.

Summary of Contents for G 7961

























































































































Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands

Miele G 7961, Operating Instructions Manual

Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands