Miele G 7961 Operating Instructions Manual Download Page 83

Page: 83 / 120

Frequently Asked Questions

Water intake fault

Problem

Possible cause and solution

The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
messages appears in
the display:



Open the water supply

The water supply is turned off.



Open the water supply all the way.



Insufficient water. Open

the water supply all the way.
Refer to Operating Instruc-
tions if necessary

Before remedying the fault:



Turn off the dishwasher.

There is a problem with the water intake.



Turn on the water supply fully and start the pro-
gram again.



Clean the filter in the water intake (see “Cleaning
the filter in the water intake” under “Cleaning and
care”).



The water-connection pressure is lower than
7.25 psi (50 kPa).
Seek professional advice.



The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under “Installa-
tion”).



Fault F 18: A technical

fault has occcurred. Turn off
the appliance, close the wa-
ter supply and contact Miele
Service.

A technical fault has occurred.



Turn off the dishwasher.



Turn off the water supply.



Contact Miele Customer Service.

The following fault mes-
sage appears during the

EnergySaver

program:

Intake temperature too low

The intake water has not reached the required tem-
perature of 115 °F (45 °C) (see “Water intake” under
“Installation”).



Start the program again.



If the fault message appears again, select a differ-
ent program.

Summary of Contents for G 7961

























































































































Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands

Miele G 7961, Operating Instructions Manual

Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands