Miele G 7961 Operating Instructions Manual Download Page 86 | Manualshive

Page: 86 / 120

background image

Frequently Asked Questions

86

Problem

Possible cause and solution

The in-operation indica-
tor light is flashing
quickly.
At the end of the pro-
gram, the alarm tone
sounds and the display
shows the following
message:



Fault F 601: A fault has

occured, turn the appliance
off then back on again.
Restart the program. If the
fault occurs agian, contact
Miele Service.

There is a fault in the AutoDos.



Turn the dishwasher off and back on again.



Check whether the PowerDisk holder and the
PowerDisk have been installed correctly (see “Au-
tomatic dispensing/AutoDos” under “Detergent”).



Activate the

AutoDos

function and restart the pro-

gram.

If the fault message appears again, there is a techni-
cal fault. You can continue to use your dishwasher by
deactivating AutoDos in the Options menu of a pro-
gram and manually dispensing the detergent via the
detergent compartment.



If you wish to use AutoDos again, contact Miele
Customer Service.

The in-operation indica-
tor light is flashing
quickly.
At the end of the pro-
gram, the alarm tone
sounds and the display
shows the following
message:

AutoDos maintenance re-
quired. Please check Auto-
Dos system.

The dishwasher does
not turn off at the end
of the program.
The dishware may not
be clean because an in-
sufficient amount of de-
tergent was dispensed.
The

AutoDos

function is

automatically deacti-
vated during the pro-
gram sequence.

An empty PowerDisk has been inserted or the Auto-
Dos is blocked by residual detergent. Detergent
dosage is insufficient.
The

AutoDos

function was automatically deactivated.



Turn the dishwasher off and back on again.

Multiple messages appear in the display.



Clean the fill channel of the AutoDos (see “Clean-
ing the AutoDos” under “Detergent”).



Clean the lower spray arm (see “Cleaning the
spray arms” under “Cleaning and care”).



Select

OK

to confirm each message.



Activate the

AutoDos

function by confirming the

message

AutoDos available

using

OK

.



Start the program again.

The program duration will be extended by up to
2.5 hours to flush out the AutoDos detergent outlet.

«
...
84
85
86
87
88
...
»

Summary of Contents for G 7961

























































































































Reviews:

No comments

Related manuals for G 7961

Brand: Metos Pages: 52

Brand: arcelik Pages: 32

Brand: Zanussi Electrolux Pages: 24

Brand: Hotpoint Pages: 12

Brand: Hotpoint Pages: 10

Brand: Maytag Pages: 20

Brand: DC Pages: 2

Brand: V-ZUG Pages: 48

Brand: Haier Pages: 20

Brand: Candy Pages: 33

Brand: Hotpoint Pages: 16

Brand: Würth Pages: 15

Brand: Candy Pages: 12

Brand: inventum Pages: 112

Brand: Haier Pages: 16

Brand: Haier Pages: 19

Brand: Haier Pages: 18

Brand: Haier Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands