Miele G 7961 Operating Instructions Manual Download Page 58

Page: 58 / 120

Operation

Interrupting a program

A program will be interrupted as soon
as the door is opened.
After 4 seconds, the message

Press

“OK” to continue

will appear on the dis-

play.



Confirm with

and close the door

within 4 seconds.

The program will continue from the
point at which it was interrupted.



Risk of scalding due to hot wa-

ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.

Canceling or changing a pro-
gram

If a program is canceled, important
program stages may be missed.
A program should only be canceled
in the first few minutes.

If a program has already started and
you wish to cancel it, proceed as fol-
lows:



Open the door.



Touch the

Back

sensor button.



Confirm the query with

Yes

The program is canceled.

If you would like to select another pro-
gram:



Touch the

Back

sensor button.

The display will change back to the Pro-
grams menu.



If you have dispensed detergent
manually, check whether the deter-
gent compartment is still closed.
If the lid is already open, fill it with de-
tergent again and close the lid.



Select the program you want, and
then start it by shutting the door
within 4 seconds.

The in-operation indicator light comes
on to show that a program has been
started.

Summary of Contents for G 7961

























































































































Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands

Miele G 7961, Operating Instructions Manual

Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands