Miele G 7919 Operating Instructions Manual Download Page 77

Page: 77 / 132

Operation

Switching on the dishwasher



Make sure the spray arms can rotate
freely.



Close the door.



Turn on the tap if it is turned off.



Touch the



sensor.

If the dishwasher has been switched
off for longer than 1 minute, you will
need to touch the



sensor for

slightly longer (wipe protection).

The Programmes menu will appear in
the display.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.

The different programmes and their use
are described in the “Programme chart”.



Select the required programme in the
display.

The display will change to the Extras
menu.

You can now select the Extras (see
“Extras”).

To select a different programme, touch
the



sensor to return to the

Programmes menu.

Summary of Contents for G 7919





































































































































Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands

Miele G 7919, Operating Instructions Manual

Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands