Miele G 7919 Operating Instructions Manual Download Page 62

Page: 62 / 132

Loading the dishwasher

Loading the FlexCare glass holder
with MultiClips

The silicone elements in the glass
holder provide a stable and secure hold
for delicate stemware.



Stemware such as wine glasses and
champagne flutes can be leaned
against the glass holder or
suspended from it.



The glass holder can be tilted up to
make more room for tall items.

You can set the glass holder at
two different heights.



Slide the glass holder to the desired
height until the catches click into
place at the top or the bottom.

The MultiClips allow you to fasten light
items such as plastic parts onto the
glass holder.



Tilt up the MultiClips.



Secure light items to the MultiClips.

Summary of Contents for G 7919





































































































































Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands

Miele G 7919, Operating Instructions Manual

Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands