Miele G 7919 Operating Instructions Manual Download Page 35

Page: 35 / 132

Using for the first time

Adding rinse aid



Lift the yellow catch on the lid of the
rinse aid container



The lid will spring open.



Only add rinse aid until the fill level
indicator (see arrow) turns dark when
the door is open horizontally.

The rinse aid reservoir holds approx.
110 ml.



Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.



Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.

You can adjust the rinse aid dosage
for best results (see "Settings - Rinse
aid").

Refilling rinse aid

When the



Refill rinse aid

message

appears, the reservoir only contains
sufficient rinse aid for another 2 - 3
programmes.



Add rinse aid in good time.



Confirm with

The refill rinse aid reminder will go out.

Summary of Contents for G 7919





































































































































Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands

Miele G 7919, Operating Instructions Manual

Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands