Miele G 7919 Operating Instructions Manual Download Page 40

Page: 40 / 132

Settings

Via App

The Miele App is available to download
free of charge from the Apple App
Store

or from the Google Play Store™.



Select the

Via App

menu option and

confirm with



Follow the instructions in the App.

Once the dishwasher is connected to
your Wi-Fi network, you can use the
App to carry out the following tasks:

- Control your dishwasher remotely

- Call up information on the operating

status of your dishwasher

- Call up information on the

programme sequence of your
dishwasher

- Set up a Miele@home network with

other Wi-Fi-enabled Miele appliances

Via WPS

As an alternative to networking via the
Miele App, you can connect your
dishwasher to your Wi-Fi network using
WPS (Wireless Protected Setup).

Your Wi-Fi router must support WPS.



Confirm the message

Press the WPS

button on your router.

with



Activate the WPS function on your
router within two minutes.



Once the connection has been
established, confirm the message
with

If the connection fails, you have
probably not connected WPS on your
router quickly enough. Repeat the steps
above.

Summary of Contents for G 7919





































































































































Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands

Miele G 7919, Operating Instructions Manual

Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands