Miele G 7919 Operating Instructions Manual Download Page 36

Page: 36 / 132

Settings

You can alter the dishwasher’s
controls to suit changing requirements
by adjusting the settings.

Settings can be altered at any time.

Opening the Settings menu



Switch the dishwasher on using the



sensor.

The Programmes menu will appear in
the display.

For further information about the
display functionality, see “Guide to the
appliance - Display functions”.



Switch to the main menu using the



sensor.



Touch the

Settings

sensor.

The display will change to show the

Settings

menu.

Changing settings



Select the setting you want to
change.

The selected setting is marked orange.



Change the value displayed and
confirm with



Touch an option to select it.



To exit a submenu use the



sensor.

The display will revert to the menu
above.

Closing the Settings menu



Touch the



sensor.

The display will change to the main
menu.

Summary of Contents for G 7919





































































































































Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands

Miele G 7919, Operating Instructions Manual

Search results

Summary of Contents for G 7919

Reviews:

Related manuals for G 7919

Brands by name

Popular brands