^
Screw the cap back on and mop up
any spilt rinsing agent. This prevents
over-foaming occuring during the
next programme.
^
Wait until the indicator light
H
/CHEM
on the control panel lights up again
before adding any more rinsing
agent.
Setting the dosage
The dosage adjuster (see arrow) in the
opening has settings from 1 to 6
(1-6 ml). It is set to "3" (3 ml) at the fac-
tory.
^
Use a higher setting if spots are left
after drying.
^
If the surface becomes cloudy and
streaky, use a lower setting.
Rinsing agent
21
Summary of Contents for G 7882
Page 3: ...Installation 53 Electrical connection 55 Plumbing 57 Technical data 60 Contents 3 ...
Page 65: ...61 ...
Page 66: ...62 ...
Page 67: ...63 ...
